您现在的位置:首页 > 产品展示

  产品展示
产品名称:HY800卧式单级活塞推料离心机
详细介绍

卧式活塞卸料离心机主要技术参数 :

 

型号
WH—800
HY800--N
 
 
  转鼓
直径(mm)
800
800
长度(mm)
400
400
转速 (r/min)
650
700 800 900
分离因数
198
220 287 363
装料限度(kg)
70
70
推料行程( mm )
40
40
推料次数(次/min)
25
40
主电机
型号  
Y160L-4
Y180M-4
转速(r/min)
1460
1470
功率(kw)
15
18.5
油泵电机
型号  
 
Y160L-6
转速(r/min)
970
970
功率(kw)
7.5
11
油压系统工作压刀 MPa
2.5
4
生产能力(t/h)  
5
>8
外形尺寸(长×宽×高)(mm)
2270*1660*1400
2270*1780*1400 
重量(kg)
3500
3800

 

 

产品结构原理Structures and Principles
主电机带动转鼓全速旋转,物料由进料管连续引入,均匀分布到转鼓内段滤网壁上,在离心力作用下,液相物穿过滤网和转鼓壁滤孔排出转鼓,经机壳排液管排出机外,固相物截留在转鼓内,形成环形滤饼层。推料盘与转鼓同速旋转的同时,在活塞推动下,连续轴向往复运动,推动滤饼层间歇不断地向转鼓外端移动排出转鼓,从前机壳底部排出机外。

The main motor drives the basket to rotate at a full speed, material being fed into through a feed pipe and distributed evenly on filter screen walls of the basket inner sect. Under the centrifugal force, the liquid is discharged out of the basket through filter screen and the holes of the basket, and then out of the machine through the tube for discharging liquid, while the solid deposits in the basket as a ring layer of cake. As the pusher plate is rotating at the same speed as the basket, it is pushed by the piston to reciprocate continuously and axially, thus pushing the cake layer to move out of the basket and then out of the machine from its front shell base.
  
 
 
产品特点与用途Characteristics and Uses
HY系列离心机是一种卧式活塞推料、连续操作过滤离心机。能在全速运转下,连续进行进料、分离、洗涤、卸料等工序。具有连续操作、运转平稳、操作简便、生产能力大、洗涤效果好、滤饼含湿率较低等特点。适合分离含固相物粒度大于0.1mm,浓度大于40%的悬浮液。适用于化工、化肥、制碱、制盐等行业,特别适用于碳酸氢铵、氯化铵、芒硝、棉花籽酸洗等固液分离。

HY Series are a kind of pusher filtering centrifuge with continuous operation. They can perform feeding, separating washing and discharging in sequence at their full-speed running. This machine has the advantages of continuous operation, stable performance, easy operation, large capacity, ideal washing effect and low moisture content of cake. They can be used for separating the suspension with solid phase particle size of more than 0.1mm and with the concentration of over 40%. They are suitable for chemical industry industry, fertilizer, manufacturing salt and alkali, especially suitable for the solid-liquid separation of ammonium bicarbonate, ammonium chloride, mirabilite, etc.
 

产品设计、制造标准

 

1

根据

JB/T447-1992

《卧式活塞推料离心机技术条件》

JB/T4063-1991

《卧

式活塞推料离心机型式与基本参数》等标准设计和制造,按

GB/T19001-2000idt   

ISO9001-2000

标准质量体系进行。

 

2

产品检测技术及手段:

根据湖南省湘潭离心机有限公司

《质量保证手册》

4.11

检测、测量和试验设备的控制对产品进行检测。

产品设计、制造标准

 

1

根据

JB/T447-1992

《卧式活塞推料离心机技术条件》

JB/T4063-1991

《卧

式活塞推料离心机型式与基本参数》等标准设计和制造,按

GB/T19001-2000idt   

ISO9001-2000

标准质量体系进行。

 

2

产品检测技术及手段:

根据湖南省湘潭离心机有限公司

《质量保证手册》

4.11

检测、测量和试验设备的控制对产品进行检测。

产品设计、制造标准: 

1、根据JB/T447-1992《卧式活塞推料离心机技术条件》、JB/T4063-1991《卧式活塞推料离心机型式与基本参数》等标准设计和制造,按GB/T19001-2000idt   ISO9001-2000标准质量体系进行。

2、产品检测技术及手段:根据湖南省湘潭辉煌离心机机械制造有限公司《质量保证手册》第3.9检测、测量和试验设备的控制对产品进行检测。
 
 
主要技术参数Technical Parameters

型 号Type
HY800-N HY1200-N
转鼓Basket 直径Diameter(mm) 800 120
过滤区长度Length of Filtering area(mm) 400 500
转速Speed (r/min) 700/800/900 500/650
分离因素Separating Factor 220/287/363 170/284
装料限度Max Loading(kg) 70 130
推料行程Length of Pusher(mm) 40 50
推料次数Frequency of Pusher(l/min) 40 30
主电机功率Main Motor Power(KW) 18.5 30
油泵电机功率Oil Pump Motor Power(KW) 11 22
液压系统工作压力Hydraulic Pressure System Operating Pressure (MPa) 2.0-3.0 2.0-3.0
外形尺寸External dimensions长×宽×高 L×W×H (mm) 2270×1780×1400 3165×2119×1912
主机重量Gross Weight(kg) 3500 7200



 

              

特别提示

1、技术参数以生产厂家说明书为准。

2、洽询时,请顾客详细赐告物料特性参数及工况条件要求。
3 、根据顾客的特殊需要,我们可以采取个性化的设计与制造:
l 材质:物料接触部分材质可为普通不锈钢、特殊不锈l 电机型式:可采用普通型或防爆型单速电机等。

l 滤网间隙宽度选择范围:0.1-0.4mm。

l 可按GMP规范设计、制造。
l 可商定其它技术要求。

 
返回首页 | 网站地图 | 联系我们
 
电话:0731-57779995  传真:0731-57779995  邮箱:1377323338@qq.com  
版权所有:湘潭辉煌离心机机械制造有限公司  备案号:湘ICP备10209319号-2
公司地址:湘潭市易俗河高新工业区 邮编:411228  网站建设优度网络
关键词:活塞推料离心机卧螺卸料离心机工业洗煤离心机刮刀卸料离心机平板式离心机上悬式离心机
佳茵益生菌官网